Powder Production Line
Powder Production Line
Powder Production Line
Model: QSGF2/30
1. Ultrasonic Cleaning Machine
Model: QCX4
Main Applications
Our ultrasonic cleaning machine is widely used for cleaning
antibiotic vials and oral liquid bottles in pharmaceutical
industry. It can connect with other machines to form linkage
production line.
Performances and Features
Speed regulation with frequency converter
Simple structure, easy operation, low maintenance
Ultrasonic rough washing, back-flushing and intensive washing
Dial wheel: bottle entering, track: bottle turning
All the parts contacting clean liquid are made of stainless steel,
non-toxic and corrosion-resistant.
The working area is separated from outside through the organic
glass cover, preventing external pollution and conforming to the
standard of GMP.
Low bottle-washing disrepair rate: less than 1%.
Working Principle of Ultrasonic Cleaning Machine
Firstly, the glass container slides along the declining
bottle-entering disc into the net belt conveyor. After being
transported to the bottle handling disc, the glass containers are
divided into four lines and enter into dial wheel. And the dial
wheel separates the containers automatically and pushes them into
the turning track, and then carry out the following procedures:
circulating water injecting, ultrasonic washing, injection water
external washing, compressed air internal flushing, injection water
internal flushing, compressed air external and internal flushing.
Complete rinsing is achieved after the above procedures are
finished. Lastly, the galss container is sent out from washing
machine, and enters into drying-sterilization tunnel.
Technical Specifications of Ultrasonic Cleaning Machine
Production capacity: 200-320bottles/min
The consumption of injection water: 300-450 L/h, pressure: 0.25 Mpa
The consumption of clean compressed air: 30m3/h, pressure: 0.25Mpa
Main power: 3.0Kw 380V 50Hz
Ultrasonic power: 1.0 Kw
Overall dimension: 2400mm1120mm ×1175mm
2. Sterilizing and Drying Machine
Model: ASMR 480/18
Main Applications
Our sterilizing and drying machine is suitable for drying and
sterilizing of glass containers such as needle bottles, ampoule
bottles, oral liquid bottles, and others.
Performances and Features
It features reasonable design, compact structure, and high
security performance.
The heating power is 27Kw.
Abrupt power-off will cause no damage to the machine due to the
high temperature.
The net conveyor belt for bottle and flank balustrade of verge
integrates into one.
Bottle delivery is more reliable due to synchronous working,
without clamping, falling or breaking bottle.
The complete monitoring device of each part ensures high safety.
Working Principle
In the consecutive transporting process, the ampoules flushed pass
by preheat area, drying area, sterilization area, heat eliminating
area, and cooling area. After this process, drying, sterilizing and
hot source eliminating will be achieved.
Technical Specifications of Sterilizing and Drying Machine
Production capacity: 6000-24000bottles/hour
The highest temperature of drying and sterilization: 400℃
(Adjustable)
The effective width of conveyor belt: 480mm
The effective length of the preheat segment: 710mm
The effective length of the sterilizing and drying segment: 1900mm
The effective length of the cooling segment: 1400mm
The applicable height of the container160mm
Cleanliness: 100 grades
Motor power: 5KW 380V 50Hz
Heating power: 18KW
Overall dimension4000×1800×2230mm
Net Weight: 2460Kg
3. Powder Filling and Coppering Machine
Model: FJG 1/16
Main Applications of Powder Filling and Coppering Machine
This machine of powder production line is ideally suited for
powder filling and coppering of the antibiotic bottle in the
pharmaceutical and chemical industries. This type of pharmacy
equipment can automatically finish a series of process, including
bottle arranging and transferring, screw filling, stopper
arranging, transferring, sucking and fastening.
Features of Powder Filling and Coppering Machine
Use double head to fill powder continuously with high output.
Separated powder filling by special large diameter screw is
precise, and can adapt to meet different filling requirements.
Each screw is suitable to all kinds of filling quantity and two
separated filling heads can fill two bottles respectively.
